NEW Blizzard Autobahn 8 DMX/ArtNet Interface Control Panel

$1,044.00

Available on backorder

Categories: , Tag:

Description

BL-AUTOBAHN8 | ArtNet/DMX bilateral signal conversion: This DMX/ArtNet interface provides thousands of DMX channels and fast DMX response and proper network load management for lighting scenarios with multiple LED fixtures and video mapping. The Blizzard AutoBahn 8 not only provides instant response, but also a lower network load. The AutoBahn 8 will allow you to increase the number of DMX universes and easily place DMX universes remotely on any TCP/IP Ethernet network. It can also be used as a DMX merger, DMX splitter, or backup device.

The Blizzard AutoBahn 8 features an RJ45 Neutrik EtherCON 10/100M Ethernet LAN port with auto MDI/MDI-X (universal cable recognition), which eliminates the need of separate MDI and MDI-X ports, selector switches, or special crossover cables. It also has 2 DMX inputs, which can be set as “input” or “disabled” status. You can assign the each input to a specific “Universe” within the range of 0.0 – F.F. When the DMX port is set as “input”, the port mode can be set as “normal” or “backup”.

In normal mode, the device will send data received from the DMX IN port to the network universe regardless of other data being received. And in backup mode, the device will NOT automatically send any data from this port. This input port will only transmit data to the network universe when the network universe is receiving no other active data input.

FEATURES
Professional-grade DMX/ArtNet interface for complex lighting setups
Eliminates need for separate MDI and MDI-X ports, switches or crossover cables
Provides fast DMX response and lower network load
Allows you to increase the number of DMX universes
Can be used as a DMX merger, splitter or backup device
Open up a new world of lighting possibilities—order today.

SPECIFICATIONS
ArtNet/DMX bilateral signal conversion
1x RJ45 Neutrik™ EtherCON® Ethernet LAN port, 10/100M, supports TCP/IP protocol
2x DMX inputs and 8x DMX outputs, each photoelectrically isolated
Auto MDI/MDI-X ethernet connector
Supports standard DMX-512 and ArtNet protocol
DMX input/outputs can be set to enabled or disabled
Each DMX output can be set to single, zero, HTP, or LTP mode
Each DMX input can be set to normal or backup mode
DMX splitter/merger functionality
Manual IP address settings
LCD display indicates each DMX input/output status
Ethernet LED status indicator
Quick and easy to set user presets

Dimensions
Length: 19 in. (482 mm)
Height: 1.75 in. (44 mm)
Depth: 6.1 in. (155 mm)
Weight: 5.1 lb. (2.3 kg)

Additional information

Weight 6 lbs
Dimensions 22 × 5 × 7 in

You may also like…